Sealey PC300 30L Wet and Dry Vacuum Cleaner 240V
£116.95
Sealey PC300 30L Wet & Dry Vacuum — compact, powerful workshop cleaner with 1100W motor delivering 128 m³/h airflow and 165 mbar suction. Lightweight and mobile with 4 castors, integrated blower, on-base tool storage and a 4 m cable. Supplied with wet/dry cartridge filter and accessory kit (Ø48 mm) for immediate use.
Description
The Sealey PC300 is a compact 30-litre wet-and-dry workshop vacuum aimed at tradespeople, small garages and DIYers who need a portable, general-purpose cleaner for both liquid spills and dry debris. It’s a straightforward, no-frills machine that prioritises manoeuvrability and sensible capacity rather than specialist dust control or heavy industrial extraction.
Key specifications at a glance
- Motor power: 1,100 W
- Airflow: 128 m³/hr
- Maximum vacuum pressure: 165 mbar
- Drum capacity: 30 litres
- Nett weight: 6.66 kg
- Cable: 4 m, with a 3‑pin UK plug
- Filter: cartridge (wet & dry supplied)
- Accessory connection diameter: Ø48 mm
- Supply noted in spec: 230 V ~50 Hz
What those numbers mean in everyday use
- 30-litre drum: large enough that you won’t be emptying it after every small spill or routine sweep. It’s suited to small workshops, vans and sites where you’re clearing wood shavings, general debris or occasional liquid spills. It’s less appropriate if you routinely tackle continuous high-volume waste or very large flood clean-ups.
- 1,100 W, 128 m³/hr and 165 mbar: the motor and performance figures put the PC300 in the mid-range for portable shop vacs. You should expect decent suction for picking up sawdust, grit, screws and typical workshop debris, and adequate power for clearing wet spills. It is not presented as a specialist fine-dust extractor for regulated hazardous dusts (see safety note below).
- Ø48 mm connections: a common size for workshop vacuum accessories, so standard hoses and nozzles will generally fit without adapters.
Who this suits — practical considerations
- Tradespeople and mobile engineers who need a light, easily moved machine for vans or varied job sites: at 6.66 kg and mounted on castors it’s easy to manoeuvre and lift.
- Small workshops and hobbyists who want a single tool for both liquids and dry mess without the bulk of industrial extractors.
- Not ideal for users needing certified HEPA filtration, continuous heavy-duty extraction or dedicated dust-extraction for professional woodworking where regulatory extraction requirements apply.
Design, use and maintenance
- Construction and mobility: high-impact plastic drum and four castors make it robust for workshop use and easy to roll around uneven floors.
- Blower function: the integrated blower is handy for clearing dust from corners or blowing debris out of crevices; it doubles the machine’s utility without extra equipment.
- Filters and wet use: a wet-and-dry cartridge filter is supplied so you can start using it straight away. With most wet/dry vacs, filters intended for dry use should be removed or protected when picking up liquids — check the user manual for the correct procedure for this model.
- Emptying and cleaning: 30 litres reduces refill frequency, but make sure you empty and rinse the drum after wet pick-up to avoid smells and blockages. Replace or clean the cartridge filter regularly to maintain suction.
Compatibility and accessories
- The Ø48 mm accessory diameter is a common standard on many workshop vacs and aftermarket hoses, making additional nozzles and extension wands easy to find.
- Tool storage points on the base help keep accessories organised during jobs.
- Supplied with a 4 m power cable and 3‑pin plug so no special wiring or installation is required.
Things to know before buying
- Voltage listing: the product title references 240 V, while the specification lists Supply: 230 V ~50 Hz. If exact mains voltage matters for your setup, check the retailer’s full listing or the manufacturer’s documentation before purchase.
- No noise or dimension data are provided in the supplied information; if workshop noise level or physical footprint is critical for storage or van mounting, confirm these details with the seller.
- Not marketed with HEPA-level filtration or hazardous-dust certification — if you work with silica, asbestos or other regulated fine dusts, you’ll need a purpose-built extractor with the right filters and certification.
- For wet pick-up, follow the manual’s guidance on filter handling to avoid damage.
SummaryThe Sealey PC300 is a practical, lightweight 30-litre wet-and-dry vacuum for general workshop and site use. It balances portability and useful capacity with mid-range performance figures; check the voltage note, and confirm noise, dimensions and filter requirements if you have specialised needs.
