Sealey PC200SDAUTO 20L Industrial Wet/Dry Vacuum 240V

Description

The Sealey PC200SDAUTO is a compact industrial wet-and-dry vacuum intended for workshop, vehicle and job‑site use. Its main appeal is the built‑in tool socket with automatic on/off synchronisation, so it suits tradespeople who want hands‑free dust extraction when using plugged‑in power tools and a lightweight, manoeuvrable extractor for routine clearing tasks.

Who this is for

• Tradespeople and small workshops needing on‑demand dust extraction when sawing, sanding or drilling using mains‑powered tools.
• Mobile users who move between vans, job sites and a workshop: the unit is relatively light and has simple castors for easy relocation.
• Anyone wanting a compact wet-and-dry machine for general workshop clean‑up and occasional vehicle or floor cleaning where a 20‑litre capacity is adequate.

Key specifications and what they mean

• Motor power: 1400 W — a relatively powerful motor for a 20 L unit; expect decent suction for workshop debris and dust. The motor runs from a 230 V supply (unit supplied with a fitted 3‑pin plug and a 4 m cable).
• Maximum vacuum pressure: 19 kPa and airflow 126 m³/h — these numbers describe suction force and airflow; together they indicate the unit is suitable for lifting dust, wood shavings and moderate debris rather than high‑volume industrial extraction.
• Drum size: 20 L — practical for general workshop use and vehicle interiors; not large enough for continuous heavy industrial use without frequent emptying.
• Weight: 5.11 kg — light to carry compared with many industrial extractors, making it convenient for mobile users.
• Accessory inlet: Ø35 mm — the hose and tools use a 35 mm fitting; check compatibility if you plan to use third‑party hoses or attachments.
• Built‑in socket and synchronisation: integrated 2000 W 3‑pin socket with automatic power tool synchronisation — when you plug a tool into this socket the vacuum will switch on and off with the tool, enabling hands‑free extraction.
• Construction: stainless steel drum — rust‑resistant body intended to withstand workshop environments.
• Blower function — useful for clearing debris from awkward spots or drying areas.

Accessories and setup

Supplied complete for immediate use:

• Stainless steel extension tubes
• Crevice tool and floor brush
• Cartridge (dry) and foam (wet) filters
• Power tool adaptor
• 4 m mains cable with fitted 3‑pin plug

Practical points: the inclusion of both cartridge and foam filters means you can configure the machine for wet or dry use; the foam filter is typically used for wet pick‑up and the cartridge for dust, but follow the user manual for correct fitting and sequence.

Practical maintenance and routine use

• Empty the 20 L drum regularly during heavier jobs to maintain suction and avoid overfilling.
• Change or clean filters according to the type of work: cartridge for fine dust, foam for wet pick‑up. Sealey consumable part numbers are listed as PCU01, PCU02, PCU03 for replacement items.
• Use the built‑in storage for tools and cable to keep the workspace tidy and prevent damage to accessories in transit.
• The blower facility can help clear debris from benches or bodywork prior to vacuuming.

Things to know before buying

• Electrical supply and circuit capacity: the vacuum motor draws 1400 W and the integrated socket is rated for 2000 W tools. If you intend to run both from the same circuit, check the site or vehicle circuit capacity and any RCD protection — using high‑draw tools and the vacuum together can approach the limits of a single domestic or van circuit.
• Hose and accessory compatibility: the vacuum uses a 35 mm accessory fitting. If you intend to use existing hoses or specialised attachments, ensure they match 35 mm or use a suitable adaptor.
• Capacity trade‑off: 20 L is convenient and portable but means more frequent emptying during heavy or continuous clearing compared with larger shop vacs.
• No noise or energy‑efficiency figures are supplied in the product information; if noise level or running cost is critical to your choice, seek those specific measurements before purchase.
• Intended uses: the unit is described for workshop, job‑site and vehicle cleaning; it’s not presented as an industrial central extractor for high‑volume continuous extraction.

Overall, the Sealey PC200SDAUTO is a lightweight, versatile wet/dry extractor with a convenient auto‑sync power tool socket and a compact 20 L capacity — a practical choice for tradespeople and mobile workshops who want an integrated, hands‑free dust extraction arrangement.